# The Azimuth Project Carbon footprint (Rev #4, changes)

Showing changes from revision #3 to #4: Added | Removed | Changed

# Contents

## Definition and calculation

There are several definitions of carbon footprint, some of which disagree slightly.

According to the European Commission:

Carbon footprint is the overall amount of carbon dioxide (CO2) and other greenhouse gas emissions (e.g. methane, laughing gas, etc.) associated with a product. A carbon footprint is a life cycle assessment with the analysis limited to emissions that have an effect on climate change.

The international standards ISO 14040-14044 can be used to calculate a carbon footprint.

According to the UK Carbon Trust

A ‘carbon footprint’ measures the total greenhouse gas emissions caused directly and indirectly by a person, organisation, event or product.

The footprint considers all six of the Kyoto Protocol greenhouse gases: Carbon dioxide ($CO_2$), Methane ($CH_4$), Nitrous oxide (N2O), Hydrofluorocarbons (HFCs), Perfluorocarbons (PFCs) and Sulphur hexafluoride ($SF_6$).

A carbon footprint is measured in tonnes of carbon dioxide equivalent ($t CO_2e$). The carbon dioxide equivalent ($CO_2e$) allows the different greenhouse gases to be compared on a like-for-like basis relative to one unit of $CO_2$. $CO_2e$ is calculated by multiplying the emissions of each of the six greenhouse gases by its 100 year global warming potential.

A carbon footprint should not be confused with an ecological footprint.

## Carbon emission per unit energy

We need information on the CO2 emission per joule of energy for many forms of energy.

For example, A Path To Sustainable Energy lists 70g/kWh for nuclear power, which seems high. As explained on our page about that paper, 4g/kWh comes from Jacobson’s estimate of what a small nuclear war would create! But the first 66g/kWh comes from a paper by Sovacool.

To be fair to Sovacool, his paper does provide some explanation as to why the estimates on which the 66 g/kWh headline figure is based vary between 2.82-22 and 10-200. The main differences are in ‘frontend’ costs: mining, milling, conversion, enrichment, fuel fabrication, and transportation which range from 0.58 to 118. Construction costs differ between reactor types and assumed lifetimes, ranging from 0.27 to 35. Overall the estimates of total emission go from 2 to 200.

The name Roberto Dones seems to be associated with careful assessment. Here’s one of his papers for the European Commission which will take a while to digest: Externalities of Energy containing detail of various different environmental costs for energy, heating and cars.

Research from the Paul Scherrer Institute, Life Cycle Assessment looks useful.

This also includes a Critical note on the estimation by Storm van Leeuwen J.W. and Smith P. … which explains why some of the estimates of CO2 lifecycle emissions attributed to nuclear energy may be anomalously high.

We need to track down some of this information and present it here!

## Carbon footprint of coal plants

In the 5th wedge of their Stabilization wedges paper, Pacala and Socolow suppose that in 2054 we have coal power plants working at 90% of capacity with an efficiency of 50%. They say that 700 gigawatts worth of coal plants like this emit 1 gigaton of carbon per year.

## Carbon footprint of transportation

For US data see:

This says US transportation produced 27% of all US greenhouse gases in 2003, and 1.87 gigatons of CO2 equivalent. This was up from 1.51 gigatons in 1990, an increase of 24 percent. Greenhouse gases from all other sectors increased by a total of 9.5 percent over the same timeframe.

category: carbon